Toshiba OIS PLUS Series User Manual Download Page 114

Page: 114 / 131

4. Click

YES

to continue. There will be a slight pause.

Please wait . . .
Enumerating Memory Drive.

5. Click

Download

Upload

7.2 Downloading from USB Drive to OIS PLUS:

In order to download an application from the USB memory drive to the OIS PLUS, the following files must be

present in the USB Drive:

Folder Name: “OIS55 PLUS”

Application File Name: “OIS55 PLUS_APP.PZM”,

Firmware File Name: “OIS55 PLUS_FW.ABS”,

Font File Name: “FONT_File.BIN”,

Ladder File Name: “OIS55 PLUS_LD.BIN”

These files are stored on the computer that created the application. They must be copied to the USB memory

drive.

The following data can be downloaded to the OIS PLUS unit.

• Application

• Firmware

• Fonts

• Ladder

1) Connect the USB stick to the unit.

2) Click

Download

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for OIS PLUS Series




































































































































Search results

Summary of Contents for OIS PLUS Series

Reviews:

Related manuals for OIS PLUS Series

Brands by name

Popular brands

Toshiba OIS PLUS Series, User Manual

Search results

Summary of Contents for OIS PLUS Series

Reviews:

Related manuals for OIS PLUS Series

Brands by name

Popular brands