Toshiba OIS PLUS Series User Manual Download Page 113

Page: 113 / 131

7.1 Overview

The USB host port can be used to perform a download or an upload of an application to or from a USB memory

drive. This enables the user to update the OIS PLUS Series or download logging data without the use of a

personal computer. Only the touch screen based OIS PLUS-Series (OIS55 PLUS, OIS60 PLUS, OIS45E

PLUS, OIS70E PLUS, & OIS120A) support USB memory drives. The drives must be formatted FAT or FAT32.

The following USB memory drives are supported:

(i) Transcend: Model - JF V30 (1 GB)

(ii) Transcend: Model - JF V30 (2 GB)

(iii) Transcend: Model - JF V30 (4 GB)

(iv) Transcend: Model - JF V30 (8 GB)

(v) SanDisk: Model - Cruzer Micro (2 GB)

(vi) SanDisk: Model - Cruzer Micro (4 GB)

(vii) Kingston: Model - DataTraveler (4 GB)

(viii) PNY: Model - Micro Attache (4 GB)

(ix) Sony: Model - Micro Vault (2 GB)

Note: Make sure to backup all data on the USB drive before connecting it with the OIS PLUS-Series.

To establish a connection between the USB drive and the OIS PLUS-Series proceed as follows:

1 Place the USB drive in the USB host port.

2 An

empty

OIS PLUS (no application or no firmware) will automatically start the USB Host function when the

OIS PLUS detects a USB drive.

3 When running an application setting system bit s037 to 1 will start USB host function provided the USB

drive is connected.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for OIS PLUS Series




































































































































Search results

Summary of Contents for OIS PLUS Series

Reviews:

Related manuals for OIS PLUS Series

Brands by name

Popular brands

Toshiba OIS PLUS Series, User Manual

Search results

Summary of Contents for OIS PLUS Series

Reviews:

Related manuals for OIS PLUS Series

Brands by name

Popular brands