H9 ASD Installation and Operation Manual
29
EOI Features
Figure 21. The H9 ASD Electronic Operator Interface features.
LED Display
— Displays the running frequency, and active Fault and/or active Alarm information.
Rotary Encoder
— Used to access the H9 ASD menu selections, change the value of a displayed
parameter, and performs the Enter key function. Turn the Rotary Encoder either clockwise or
counterclockwise to perform the Up or Down functions of the displayed menu selection. Press the Rotary
Encoder to perform the Enter (select) function.
LCD Display
— Displays configuration information, performance data (e.g., output frequency, bus
voltage, torque, etc.), diagnostic information, and LED Display information in expanded normal text.
Local|Remote Key
— Toggles the system to and from the Local and Remote modes. The
Local|Remote Key is disabled while the Fault screen is displayed. The LED is on when the system is in
the Local Command mode. The Local mode allows the Command and Frequency control functions to
be carried out via the EOI.
The Remote mode enables the Command and Frequency control functions to be carried out via the
Terminal Board, RS485, Communication Board, or Pulse Input. The selection may be made via
Program
⇒
Fundamental
⇒
Standard Mode Selection
⇒
Command Mode
and
Frequency Mode 1
,
respectively.
The availability of Local mode control (Command and Frequency control) may be disabled via Program
⇒
Utilities
⇒
Prohibition
⇒
Local/Remote Key Command Override
and
Local/Remote Key
Frequency Override
. The availability of the Local mode of operation may be reinstated by changing this
setting or performing a Reset (see
F007
).
ESC Key
— The Escape key returns the system to the previous level of the menu tree, toggles between
the EOI Command screen and the Frequency Command screen, or cancels changes made to a field if
pressed while still in the reverse video mode (dark background/light text). The 3 functions are menu-
specific.
Run Key
— Issues the Run command while in the Local mode. The Run key LED Illuminates green
while stopped or red while running to alert personnel.
Mode Key
— Provides a means to access the three root menus. Pressing the Mode Key key repeatedly
loops the system through the three root menus (see
Figure 27 on pg. 41
). While looping through the root
menus, the Program menu will display the root menu screen or the Program sub-menu item being
accessed prior to pressing the Mode key.
LCD Display
Rotary Encoder
Local/Remote
Mode
Key
Press for Enter Key
Escape Key
Stop|Reset Key
Key (LED)
Run Key
(LED)
LED Display
LED / LCD Display
}
01:14
Selected
Number
item: (01)
of items: (14)
Program
Terminal...
Direct Access...
Utilities...
Protection...
Fundamental...
