Toshiba GD-1260 Operator'S Manual Download

Page: 9 / 128

Before Reading This Manual 7



Description of original/paper direction

Paper or originals of A4, B5 or LT size can be placed either in a portrait direction or in a landscape direction.
In this manual, “-R” is added to this paper size when this size of paper or original is placed in a landscape
direction.

Example: A4 size original on the original glass

Paper or originals of A3, B4, LD or LG can only be placed in a landscape direction, therefore “-R” is not added
to these sizes.



Trademarks

The company names and product names in this manual are the trademarks of their respective companies.



Regarding paper printed by e-STUDIO307LP

Avoid the following actions as paper printed by e-STUDIO307LP may discolor.



Store for long period of time



Leave in places exposed to high temperature, such as inside of a car



Leave in places exposed to direct sunlight



Rub the print side hard with a rubber and the like



Accessories

Accessories Provided for GD-1320/GD-1350/GD-1270



Modular cable: 1



Operator's Manual: 1

Placed in a portrait direction: A4

Placed in a landscape direction: A4-R

Summary of Contents for GD-1260
































































































































Search results

Summary of Contents for GD-1260

Reviews:

Related manuals for GD-1260

Brands by name

Popular brands

Toshiba GD-1260, Operator'S Manual

Search results

Summary of Contents for GD-1260

Reviews:

Related manuals for GD-1260

Brands by name

Popular brands