Toshiba GD-1260, Operator'S Manual

Page: 25 / 128

2.SENDING/RECEIVING A FAX
Sending a Fax 23
2 SENDING/RECEIVING A FAX
Redial function
In the memory transmission mode, if the fax cannot be sent due to a busy-line, the fax number is redialed
automatically to send the fax. By default, this equipment redials 3 times at 1-minute intervals.
Batch transmission function
If there are multiple transmission jobs to the same recipient in memory, you can send them at once using this
function, resulting in reduction of communication costs. However, if their recipients are the same but their
transmission conditions vary or if users or departments are different when this equipment is managed under
the department management or user management, this function is not applied to those reserved jobs.
Sending the next original
If an original is placed on the original glass and its scanning is completed, the confirmation screen for the next
original is displayed. If you want to continue scanning of the next original, place it on the original glass, and
then press the [START] button on the control panel. Once all the originals are scanned, press [JOB FINISH]. If
you place an original on the RADF (Reversing Automatic Document Feeder) and press the [CONTINUE]
button during scanning, the confirmation screen for the next original can be displayed after the scanning is
completed.
 If you leave the screen unattended for a period of the auto clearance setting time (45 sec. by manufacturer
default), a copy of the scanned originals is sent.
 To cancel the transmission in the memory transmission mode, press [JOB CANCEL].
 P.53 “Canceling the memory transmission”
 To change the transmission conditions for each page, press [OPTION].
 P.32 “Changing the settings for each page”