Toshiba GD-1260 Operator'S Manual Download | Manualshive

Page: 32 / 128

background image

2 SENDING/RECEIVING A FAX

30 Sending a Fax

RESOLUTION

Set the resolution based on the fineness of the original.

If the recipient’s fax machine is not capable of receiving originals at the same resolution, the resolution is
automatically converted before being sent to the recipient. The higher the resolution is, the longer it takes
to send an original.

TX TYPE

Set the fax transmission mode.

ORIGINAL MODE

Set the scanning mode based on the type of the original.

In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than that in the TEXT
mode.

ORIGINAL SIZE

Set the scan size of the original.

If the recipient’s fax machine is not capable of receiving originals of B5/B5-R size, this equipment may
reduce that size before sending it. To avoid this, when the original to be set is B5 and B5-R size, specify A4
and A4-R size respectively.

EXPOSURE

Set the density at which the original is to be scanned.

STANDARD:

This is suitable for an original with regular size text.

FINE:

This is suitable for an original with small size text and fine illustrations.

U-FINE:

This is suitable for an original with ultra-fine illustrations.

MEMORY TX: Send the original after the scanned data are saved in the memory. Up to 100

transmissions of up to 1000 pages per 1 transmission can be reserved, or up to 50
transmissions when the hard disk is not installed.

DIRECT TX:

Send the original directly as it is being scanned. Once a page has been scanned and
sent, the next page is scanned and sent. Therefore, it takes longer to scan and send all
pages. However, you can confirm on the fly that each page is sent to the recipient.

TEXT:

This is suitable for an original with text and line drawings.

TEXT/PHOTO: This is suitable for an original with a mixture of text and photos.
PHOTO:

This is suitable for an original with photos.

AUTO:

The size of the original is automatically determined before the original is scanned.

DIFFERENT WIDTH: Select this function to load the originals with different width into the RADF

(Reversing Automatic Document Feeder).

Specified size:

The original is scanned at the preset size regardless of its actual size.

AUTO:

This equipment automatically detects the contrast of the original, and scans it with the optimum
density.

Manual:

Press

or

to set the desired contrast.

«
...
30
31
32
33
34
...
»

Summary of Contents for GD-1260

































































































































Reviews:

No comments

Related manuals for GD-1260

Brand: Olympus Pages: 2

Brand: Olympus Pages: 148

Brand: Panasonic Pages: 169

Brand: Oki Pages: 118

Brand: Oki Pages: 126

Brand: Xerox Pages: 8

Brand: Oki Pages: 349

Brand: Oki Pages: 104

imageRUNNER 2545i

Brand: Canon Pages: 37

Brand: Savin Pages: 160

Brand: Oki Pages: 40

Brand: Oce Pages: 209

Brand: Ricoh Pages: 44

Brand: Oki Pages: 187

Brand: Phoenix Contact Pages: 52

Brand: RHINO Pages: 21

Executive Series 3037

Brand: Oki Pages: 546

Accel-a-Writer 4

Brand: Xante Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands