Toshiba GD-1260 Operator'S Manual Download

Page: 52 / 128

3 CHECKING AND CANCELING THE COMMUNICATIONS

50 Checking Communications

Checking Communications



Checking reserved transmissions

You can check reserved fax transmissions.

Press [JOB STATUS].

Select [FAX].



Reserved transmission jobs are listed in the reversed chronological order from top to bottom.



Press

to switch the pages.



To print the list of the reserved transmissions jobs, press [RESERVATION LIST].



In the “Status” column, the status of each job is indicated as follows:

Line1:

Sending on the 1st line.

Line2:

Sending on the 2nd line.

Network:

Reserved for sending via Internet Fax.

Delayed:

Reserved with the time to send specified.

Wait:

Communication is in the standby queue.

Invalid:

Under standby due to an invalid department code (Network Fax). For details of
Network Fax function, refer to the

Network Fax Guide

Summary of Contents for GD-1260
































































































































Search results

Summary of Contents for GD-1260

Reviews:

Related manuals for GD-1260

Brands by name

Popular brands

Toshiba GD-1260, Operator'S Manual

Search results

Summary of Contents for GD-1260

Reviews:

Related manuals for GD-1260

Brands by name

Popular brands