Toshiba GD-1260, Operator'S Manual

Page: 33 / 128

2.SENDING/RECEIVING A FAX
Sending a Fax 31
2 SENDING/RECEIVING A FAX
ECM
Switch the ECM (Error Correction Mode) communication ON or OFF. ECM is an internationally standardized
communication mode that automatically corrects errors that occur during fax transmissions. With this setting
option ON, even when the transmitted data have been affected by noise during communication, this mode
allows good communication without image distortion by automatically resending the parts that have been
affected.
 Both the sender and the receiver must have the ECM function to make ECM communication available.
 When affected by noise during communication, communication time is slightly longer than usual. Even
when the ECM communication is used, an error may occur depending on the line status.
 The ECM communication is not available for voice communication.
QUALITY TX
Switch Quality TX ON or OFF. When this mode is set to ON, originals are sent at a slower speed than usual
and the chances of errors occurring decrease.
Even if the recipient's QUALTY TX setting is set to ON in the address book, it becomes OFF at a fax
transmission if you press [OK] on the OPTION screen without enabling the QUALTY TX setting.
MAIL BOX COMMUNICATION
For the communication compatible with ITU-T (International Telecommunications Union-Telecommunications)
standards, specify a subaddress or password to be sent to the recipient's fax machine. (Up to 20 digits can be
entered.)
To use this function, the recipient’s fax machine must be capable of setting an ITU-T compatible
subaddress or password.
INTERNET FAX
This is not used for sending a standard fax.
LINE SELECT
Specify the line to be used for sending a fax when the 2nd Line for FAX Unit is installed.
 P.112 “Setting 2nd Line for FAX Unit”
SUB (Subaddress): Information to send data of the original to the fax machine.
SEP (Selective Polling): Information to retrieve data of the original from the fax machine.
SID (Sender Identification): Password for SUB.
PWD (Password):
Password for SEP.
SUBJECT: The subject of the Internet Fax
BODY:
The body of the Internet Fax
AUTO: The line is switched automatically.
LINE 1: The 1st line is used.
LINE 2: The 2nd line is used.