Toshiba GD-1260 Operator'S Manual Download

Page: 114 / 128

6 SETTING ITEMS

112 Administrator Settings



Setting 2nd Line for FAX Unit

You can make settings so that two lines can be used at the same time using the 2nd Line for FAX Unit
installed. In addition to the settings described below, you need to:





P.106 “Registering the terminal ID”



Set the dial type.



P.107 “Setting the initial setup”

Press [LINE-2 MODE].

Set how you want to use the 2nd line, and then press [OK].

TX / RX

The 2nd line is used for both transmission and reception.

RX ONLY (24HR)

The 2nd line is used only for reception.

RX ONLY (TIMER)

The 2nd line is used only for reception during a specified period of time. To move the cursor, use

. Specify the time period on a 24-hour basis using the digital keys on the control panel.

The automatic reception is only available for the 2nd line.

Summary of Contents for GD-1260
































































































































Search results

Summary of Contents for GD-1260

Reviews:

Related manuals for GD-1260

Brands by name

Popular brands

Toshiba GD-1260, Operator'S Manual

Search results

Summary of Contents for GD-1260

Reviews:

Related manuals for GD-1260

Brands by name

Popular brands