Toshiba FS-3700 Series Owner'S Manual Download

Page: 125 / 150

Chapter 5 - Reports

Sales Mix Report

FS-3700 Owner’s Manual

5-11

5.4 Sales

Mix

Report

System

Revenue

Center Station User

This report selection has three options:

Detail

- Detailed information for each menu item being tracked

and that was sold for the period. The Track System flag in the
Menu Setup table determines whether the item is detailed in the
report.

Departments

- A summary by Departments of Menu Items sold.

Categories

- A summary by Category of Menu Items sold.

Report Items

Item/Department/Category Line -

This line contains the record

number of the Menu Item, Department or Category, and the
item’s name. The Menu Item report includes the average selling
price of the total number of items sold.

# Sold

- The number of the Menu Item sold, and the number sold as

a percent of total items sold for the period.

Gross Revenue

- The amount of revenues generated by selling the

Menu Item, and the revenues for the Menu Item as a percent of
total.

Item Discounts

– The dollar amount that was discounted from

specific items and the percentage of the total revenue from this
Menu Item that was discounted.

Discounts

– This total is only on the report summary. The total

dollar amount of discounts that were applied to check subtotals.

Net Sales

– Total of the selling prices of this menu item, adjusted for

Item discounts.

Summary of Contents for FS-3700 Series























































































































































Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands

Toshiba FS-3700 Series, Owner'S Manual

Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands