Toshiba FS-3700 Series Owner'S Manual Download

Page: 84 / 150

Check Adjustments

Chapter 3 - Guest Check Functions

3-40

FS-3700 Owner’s Manual

3.11 Check Adjustments

3.11.1 Void Items on Stored Checks

Remove Single Items

The same procedure is used to void items before or after sending.
After a menu item has been sent/stored and the check recalled, the

{VOID}

key can only be used according to the security level set in

the Function Setup table.

1. Recall the check.

2. Press

{VOID}

3. If prompted, index a manager approval I.D. and press

{TOTAL}

4. Use the up and down arrow keys to highlight the item to be

removed from the check.

•

Highlighting a primary Menu Item automatically highlights the
item’s modifiers.

5. Press

{VOID}

6. The item is removed from the check.

Remove All Items

The same procedure is used to void all items before or after sending.
After a check has been sent/stored and the check recalled, the

{VOID~ALL~ITEMS}

key can only be used according to the security

level set in the Function Setup table.

Procedure

1. Recall the check.

2. Press

{REMOVE~ALL~ITEMS}

3. If prompted, index a manager approval I.D. and press

{TOTAL}

4. The entire check is voided.

Summary of Contents for FS-3700 Series























































































































































Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands

Toshiba FS-3700 Series, Owner'S Manual

Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands