Toshiba FS-3700 Series Owner'S Manual Download

Page: 90 / 150

Check Adjustments

Chapter 3 - Guest Check Functions

3-46

FS-3700 Owner’s Manual

3.11.4 Add a Tip

A charge tip can also be entered when the check is tendered by
defaulting an overtender entry to the tip amount.

Auto Gratuity

The Auto Gratuity feature is set using the AUTO GRAT GSTS field in
the Order Type Table. When the number of guests is at least the
number entered there, the system automatically adds a gratuity
when the check is printed.

Procedure

1. Check must have # guests entered which equals or exceeds

AUTO GRAT GSTS field for the Order Type.

2. Index the number and press

{GUESTS}

3. Enters item(s) to the check.

4. Press

{PRINT~CHECK}

to end the service round.

•

The auto gratuity is calculated based on TIP field in System
Config Table.

Summary of Contents for FS-3700 Series























































































































































Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands

Toshiba FS-3700 Series, Owner'S Manual

Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands