Toshiba FS-3700 Series Owner'S Manual Download

Page: 120 / 150

Reports Overview

Chapter 5 - Reports

5-6

FS-3700 Owner’s Manual

5.1.3 Report Sample Formats

The following pages show details of each report option.

•

The table beneath each report title indicates if the report is
included in System, Revenue, Station or User totals.

•

The reports shown are samples and do not all balance with
each other.

•

Any extra notes included for a particular line is right justified
close to that line in the report.

•

A wavy line in the middle of a report indicates that part of it
was “cut out” so a total could be included on the same page.

Report Headers

----------------------------------------

4:20 pm 7/14/05

The time & date the report was taken.

FINANCIAL REPORT

SYSTEM REPORT

Daily

The report Name, Type and Period.

FROM 7/14/05 0:00 TO 7/14/05 16:20

The time period that the report covers.

TOSHIBA TEC AMERICA - Atlanta, GA

Store name and location, from

System Setup/System Config page 1.

----------------------------------------

Summary of Contents for FS-3700 Series























































































































































Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands

Toshiba FS-3700 Series, Owner'S Manual

Search results

Summary of Contents for FS-3700 Series

Reviews:

Related manuals for FS-3700 Series

Brands by name

Popular brands