Toshiba FL654A, User Manual

Page: 80 / 116

Chapter 8 Startup Using nV-Tool
6F8C1625
64
8
6
Registering the talker blocks
Talker blocks are registered on "Scanning memory folder" of "FL-net Control LAN".
Talker block of the dummy station for the remote I/O station and talker block of FL654A are
registered respectively.
Talker block of dummy station for remote I/O station
Talker block of dummy station for remote I/O station is set to the place of FL-net
common memory area allocated in FL654A subordinate's output module.
In this sample, it registers thoroughly to talker block of FL622 of "FL-net LAN".
Talker block of FL654A
Word No. of talker block for FL654A talker area must be set "head address of
FL654A talker area +4words”. These 4words have been reserved for RAS data
such as healthy counters of FL654A.
When the above-mentioned rule is not observed, the download of I/O
configuration information becomes an error (text parameter error).
In this sample, word No. of talker block is made "head address of talker area
+4words".
Word No. of talker block for FL654A talker area must be set
"head address of FL654A talker area +4words”.
Area2 talker area head address is 512 …”516”