Unified Controller nv Series FL-net Remote I/O Station Module FL654A User's Manual
v
CAUTION
Prohibited
Do not touch anything other than
the operation part (setting
switches inside the module), such
as the IC parts and terminals,
connectors, and soldered
surfaces inside the module
Doing so may result in electrostatic
breakdown of the ICs and LSIs, causing
failure. Also, an injury may occur due to
the ends of the part lead wires, or burns
may occur due to hot parts.
Prohibited
Do not disassemble or modify the
device or module.
It may cause malfunction or failure as
well as loss of safety of the device.
Mandatory
Push the module into the base
unit until it clicks, secure it to the
base unit with screws.
If fixation is loose, it may cause
malfunction or malfunction due to
vibration etc.
Prohibited
Do not forcefully bend, pull, or
twist the power cord and cables.
It may cause breaks or heating.
Prohibited
Do not insert any metal into the
gaps of the device main body.
It may cause fire.
Mandatory
When you attempt to perform
program change, forced output,
RUN/HALT controls, etc. during
operation, check for safety.
Incorrect operation or negligence in
checking safety conditions may cause
accident or machine damage.
Mandatory
Set the switch with the specified
setting method and setting
contents.
Switch setting outside the specified range
may cause malfunction or malfunction.
Mandatory
Use your cellular phone or PHS
one meter or more away from the
product main unit in operation,
various transmission cables, and
I/O cable.
Otherwise, the system may malfunction.
5. Safety Precautions on Transportation, Storage, and Disposal
CAUTION
Mandatory
Observe ordinances and rules
When disposing the product, observe the
ordinances and rules of the local
government.
Mandatory
For transportation and storage of
the product, use a conductive bag
and packaging box
Otherwise it will cause failure.
Summary of Contents for FL654A
