6F8C1625
ii
1. Safety Precautions on Installation
WARNING
Ground
Ground the device.
Otherwise, it may cause an electric shock
or fire.
Mandatory
Configure the emergency stop
circuit and the interlock circuit
outside the controller.
Otherwise, this may cause human injury
or machine damage if the nv series has a
failure or malfunction.
Mandatory
Turn off the power before wiring
cables
Otherwise, it may cause electric shock or
failure.
Mandatory
For wiring a module, use
sheathed, crimp-style terminals or
cover with tape. and Mount the
terminal block cover firmly to the
terminal block.
Otherwise, conductive parts are exposed
to cause electric shock.
CAUTION
Prohibited
Do not install, store, or use it in
the following environments.
・
A place with a lot of dust
・
A place with corrosive gases (SO2,
H2S) ore flammable gases
・
A place with vibrations and shocks
exceeding the allowed values
・
A place with condensations due to
rapid temperature changes
・
A place with low or high temperature
outside of the installation condition
・
A place with high humidity outside of
the installation condition
・
A place with direct sunlight
・
A place near equipment generating
strong radio waves or magnetic fields
It may cause accidents.
Mandatory
Install the device in a place where
maintenance and inspection can
be done easily.
Otherwise, it may cause accidents.
Mandatory
Connect an external power supply
suitable for the rating.
Otherwise, explosion or fire may be
caused.
Prohibited
Do not block the ventilation hole
or air inlet/outlet.
It may cause fire or failure due to
overheat.
Mandatory
For installation and wiring of the
system, observe the installation
conditions and methods
described in this document.
Otherwise, it may cause a fall, fire,
failure, or malfunction.
Mandatory
Wiring works shall be done by a
qualified electrician.
Improper wiring may cause fire, electric
shock, or failure.
Mandatory
Prevent foreign matter such as
electric wire scraps from entering
modules or units.
It may cause fire, malfunction or
malfunction.
Summary of Contents for FL654A
