Toshiba E-STUDIO5506AC Imaging Manual Download Page 60

Page: 60 / 331

e-STUDIO5506AC/6506AC/7506AC (Ver01)

2-14

2. Copier-specific Adjustments

(4)

Select [05 ADJUSTMENT MODE]. Change the setting values for codes [7665] to [7671] to adjust the hue.

Original mode

[05]code

Subcode

Recommended value

Default

Text/Photo

05-7665

0/1/2/3/4/5

0 to 255

128

Text

05-7666

Printed image

05-7667

Photo

05-7668

Map

05-7669

User custom

05-7670

Red seal color

05-7671

* Set the value in increments of approx. 15 steps while checking the copy image until the optimum value is

obtained.

* Each setting value for the Text/Photo, Text and Photo (developing paper) original mode is reflected to the

quality of the image in the Full color and Auto color modes.

* The sub code varies according to the area where the hue is adjusted. Set the sub code for the area to be adjusted

by referring to the following below.

Subcode

Target area of hue

adjustment

Recommended value

For adjusting the tint of

Red

Setting a larger value: The tint of Red becomes closer to that

of Y (Yellow).

Setting a smaller value: The tint of Red becomes closer to

that of M (Magenta).

For adjusting the tint of

Yellow

Setting a larger value: The tint of Yellow becomes closer to

that of G (Green).

Setting a smaller value: The tint of Yellow becomes closer to

that of R (Red).

For adjusting the tint of

Green

Setting a larger value: The tint of Green becomes closer to

that of C (Cyan).

Setting a smaller value: The tint of Green becomes closer to

that of Y (Yellow).

For adjusting the tint of

Cyan

Setting a larger value: The tint of Cyan becomes closer to

that of B (Blue).

Setting a smaller value The tint of Cyan becomes closer to

that of G (Green).

For adjusting the tint of

Blue

Setting a larger value: The tint of Blue becomes closer to

that of M (Magenta).

Setting a smaller value The tint of Blue becomes closer to

that of C (Cyan).

For adjusting the tint of

Magenta

Setting a larger value: The tint of Magenta becomes closer to

that of R (Red).

Setting a smaller value The tint of Magenta becomes closer

to that of B (Blue).

Summary of Contents for E-STUDIO5506AC









































































































































































































































































































































Search results

Summary of Contents for E-STUDIO5506AC

Reviews:

Toshiba E-STUDIO5506AC, Imaging Manual, Page: 60 / 331

Search results

Summary of Contents for E-STUDIO5506AC

Reviews: