Toshiba E-STUDIO5506AC Imaging Manual Download Page 126

Page: 126 / 331

e-STUDIO5506AC/6506AC/7506AC (Ver01)

2-80

2. Copier-specific Adjustments

(2)

Press [USER FUNCTIONS] on the Control Panel. Then press [+] or [-] of [OMIT BLANK PAGE

ADJUSTMENT].

(3)

Select [05 ADJUSTMENT MODE]. Change the value for the code [7618] to adjust the threshold for
judging the original as blank pages.

• The larger the setting value is, the more the original tends to be judged as a blank page.

[05] code

Recommended value

Acceptable range value

Default

05-7618

Set a value larger than 128.

0~255

128

* Set the value in increments of approximately 15 until the optimum value is obtained, while checking if

proper originals are judged as a blank page.



Caution after the adjustment

• When the threshold for judging blank pages is changed, the same threshold for in the network scanning

function is also changed.

• Originals with a small portion of small letters may be judged as a blank page. Therefore adjust the value

carefully while checking the copy image.

Summary of Contents for E-STUDIO5506AC









































































































































































































































































































































Search results

Summary of Contents for E-STUDIO5506AC

Reviews:

Toshiba E-STUDIO5506AC, Imaging Manual, Page: 126 / 331

Search results

Summary of Contents for E-STUDIO5506AC

Reviews: