Toshiba E-STUDIO5506AC Imaging Manual Download Page 297

Page: 297 / 331

e-STUDIO5506AC/6506AC/7506AC (Ver01)

4-9

4. e-Filing-specific Adjustments

4.5 To Finely Print the Image Stored in the e-Filing box

(To print images stored through Copy to Box or Print to Box)

Before adjustment

After adjustment

If the image stored in the e-Filing box is

downloaded to a PC and then printed out, the

image data conversion may diminish the image

quality.

If the image is printed out directly from the e-

Filing box, the image quality will be

maintained.

e-Filing box

Client PC

Stored

Copy to Box,

Print to Box

(Print data)

Downloaded

(Converted into RGB)

Print

(Converted into

print data again)

Print

(Print data)

e-Filing box

Copy to Box,

Print to Box

(Print data)

Stored

Summary of Contents for E-STUDIO5506AC









































































































































































































































































































































Search results

Summary of Contents for E-STUDIO5506AC

Reviews:

Toshiba E-STUDIO5506AC, Imaging Manual, Page: 297 / 331

Search results

Summary of Contents for E-STUDIO5506AC

Reviews: