Toshiba E-STUDIO5506AC Imaging Manual Download Page 41

Page: 41 / 331

e-STUDIO5506AC/6506AC/7506AC (Ver01)

1 - 25

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

(4)

Select [05 ADJUSTMENT MODE]. Select code [4719], and then press the [START] button.

•

Registration control will be forcibly performed.

(5)

Enter code [104], and then press [TEST PRINT].
•Paper is fed from the drawer to print out a test print pattern.

Code

Test print pattern

Paper size No. of copies

104

Test print pattern for identifying

out-of-registration colors

A3/LD

(6) Check the first page of the printed test print pattern to identify a pattern for the out-of-registration colors.

* There are 2 patterns for the out-of-registration colors. Check which pattern the out-of-registration colors to

adjust on the body are included.

Pattern A for out-of-registration colors

Paper feeding speed

faster than

transfer belt

rotating speed

Black belt at the leading edge in the paper feeding direction

Paper feeding direction

age 1

Page number

Patch eliminated

trailing edge

Summary of Contents for E-STUDIO5506AC









































































































































































































































































































































Search results

Summary of Contents for E-STUDIO5506AC

Reviews:

Toshiba E-STUDIO5506AC, Imaging Manual, Page: 41 / 331

Search results

Summary of Contents for E-STUDIO5506AC

Reviews: