Home
/
Toshiba
/
E-STUDIO5506AC
/
Imaging Manual

Toshiba E-STUDIO5506AC, Imaging Manual, Page: 197 / 331

Share

Page: 197 / 331

Toshiba E-STUDIO5506AC Imaging Manual Download Page 197

e-STUDIO5506AC/6506AC/7506AC (Ver01)

© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved

3-61

3. Printer-specific Adjustments

<Note>

This adjustment changes the values set in the MFP. Therefore, it will affect every user who uses

the printer by connecting it to the MFP. After the adjustment, the values changed will be applied
to all printouts for the "Image Quality Type" and "Halftone" options. (For instance, if the value
for [05] code for PCL6 and Detail is changed, it will be applied to printing performed with
PCL6 and Halftone = "Detail" (or "Auto") selected.)

Carefully perform the adjustment, being aware that the image quality of all future printouts will
be changed, when printing out originals other than the one that is used for the adjustment.
If "Smooth" is selected from among the "Halftone" options, this adjustment will have no affect.

After adjusting the color balance, print and check the print image quality.

If further image quality adjustments are still necessary, use the next procedure.



Caution after the adjustment

・

The adjustment may possibly cause outlined edges, incorrect color of thin lines, jaggies, variations in

gradation and unnatural photo images. Therefore, carefully perform the adjustment, while checking the
printouts.

・

The adjustment may possibly cause an increase in the amount of toner used, moiré, blurred text (blurring of
small, dark text), faint text (fine outlines of text shredded), diminished photo images or gradational images
(less accurate reproducibility of halftones), or in some consumption conditions, background fogging or a
decrease in the amount of developer material (carrier streaks). Therefore, carefully perform the adjustment,
while checking the printouts.

• In step (6) the adjustment value for K (Black) and the resolution 600 dpi is the same as those for the Photo

mode in the Copier function and the Gray scale mode. Therefore, carefully perform the adjustment, while
checking the printouts.

・

In step (6) the adjustment value for the resolution 600 dpi is the same as that for the Full Color mode in the

Copier function. Therefore, carefully perform the adjustment while checking the printed image.



Remarks

• Enter the value mentioned in the procedures or one within the recommended value range for the adjustment.

Otherwise, it may cause a loss in MFP performance, including degradation in the image quality and a
reduction in the life of the consumables.

«
...
195
196
197
198
199
...
»

Summary of Contents for E-STUDIO5506AC












































































































































































































































































































































Reviews:

No comments