Toshiba e-STUDIO35 Operator'S Manual Download Page 93

Page: 93 / 124

5-20

ENTERING AND SETTING ITEMS

3. SETTING VARIOUS FUNCTIONS (Cont.)

Setting at 2nd Line Board (optional) Installation (Cont.)

Press the SETTINGS key to display the settings

menu, then the INITIAL SETUP key.

Press the LINE-2 MODE key.

2nd Line Setting

When the optional 2nd line board is installed, its operation can
be selected from the following:
• Transmission/Reception

: Both transmission and reception

are available all the time.

• Reception only (24 hours) : The 2nd line is always standing by

for reception.

• Reception only (timer)

: Only reception is available during

the specified period of time.

* Even during reception only, the specified line performs trans-

mission if any line has been specified by the options or phone
book menu.

Transmission and Reception (TX/RX)

Press the TX/RX key.

Press the SET key.

#05-11_Entering and Setting.p65

9/30/00, 1:42 PM

Summary of Contents for e-STUDIO35





























































































































Search results

Summary of Contents for e-STUDIO35

Reviews:

Related manuals for e-STUDIO35

Brands by name

Popular brands

Toshiba e-STUDIO35, Operator'S Manual

Search results

Summary of Contents for e-STUDIO35

Reviews:

Related manuals for e-STUDIO35

Brands by name

Popular brands