Toshiba e-STUDIO35, Operator'S Manual

Page: 75 / 124

1
2
3
4
5
6
7
8
9
10
11
12
5-2
ENTERING AND SETTING ITEMS
1. ENTERING THE REMOTE FAX NUMBERS
Entering into Phone Book
1 Press the SETTINGS key to display the settings
menu, then the TELEPHONE NUMBERS key.
If you register remote FAX numbers into the phone book in advance, you can specify them in a single
touch at transmission and reception. You can enter the following items into the phone book.
• ID number -------------------- Enter a number within the range from 001 to 400. This number can be used
to find a remote FAX number by ID number.
• Name of remote FAX ------ Enter a name comprising up to 20 letters.
Note, however, that only the leading 12 letters can be displayed in the phone
book screen.
• TEL Number of remote FAX ------- Enter the TEL (FAX) number (max. 128 digits) of the remote FAX.
• 2nd TEL Number ------------ The call is routed to the sub number (max. 128 digits) when the main line is
busy.
• SUB/SEP/PWD -------------- SUB/SEP and PWD can be registered to each remote FAX you are enter-
ing.
SUB/SEP/PWD
Page 5-4
• Quality TX --------------------- Set whether or not to specify Quality TX to each of the remote FAX numbers
you are entering.
• Transmission type ----------- Choose from memory TX and direct TX for each remote FAX.
• ECM ---------------------------- Set whether or not to specify ECM to each of the remote FAX numbers you
are entering. ECM communication Page 2-9
• Line ----------------------------- Set the line to be used for transmission to each remote FAX you are enter-
ing (with the FAX board attached).
• Transmission attenuator --- Set the transmission attenuator for each remote FAX.
* For details on setting, consult your nearest Toshiba Service Station.
#05-01_Entering and Setting.p65 10/2/00, 2:18 PM 2