Toshiba e-STUDIO35 Operator'S Manual Download

Page: 91 / 124

5-18

ENTERING AND SETTING ITEMS

Press the desired key for each item.

• The screens on the right shows the default settings.

• With the monitor tone volume, you can adjust the line moni-

tor tone volume in the on-hook mode.

• With the completion tone volume, you can adjust the ringer

tone volume when original printing has been completed.

• To adjust the volumes, press the and keys. Press-

ing the key raises the volume, while pressing the
key lowers it (When a tone is set to “0” , it does not sound)

Press the SET key.

• The registered items can be confirmed in the function list.

Page 5-38

Note

There is no second screen to display the dial types for the
European version.

3. SETTING VARIOUS FUNCTIONS (Cont.)

Setting the Reception Mode (Cont.)

#05-11_Entering and Setting.p65

10/2/00, 2:19 PM

Summary of Contents for e-STUDIO35





























































































































Search results

Summary of Contents for e-STUDIO35

Reviews:

Related manuals for e-STUDIO35

Brands by name

Popular brands

Toshiba e-STUDIO35, Operator'S Manual

Search results

Summary of Contents for e-STUDIO35

Reviews:

Related manuals for e-STUDIO35

Brands by name

Popular brands