Toshiba e-studio182 Operator'S Manual Download Page 95

Page: 95 / 230

Copying on Both Sides - DUPLEX - 93

Select the duplex copying mode, and then press the [ENTER] but-
ton or

button.

1>2 DUPLEX:

1-sided original to 2-sided copy

2>2 DUPLEX:

2-sided original to 2-sided copy

Select the finishing mode, and then press the [ENTER] button.

BOOK TYPE:

Open to left

TABLET TYPE:

Open to top

The mode of duplex copying is set.

Select the other copy modes as required, and then press the
[START] button.

Copying starts.

Place the next original if you are using the original glass, select
“YES”, and then press the [ENTER] button. Repeat this procedure
until all the originals are scanned.

You can press the [START] button instead of selecting “YES”.

When all the originals have been scanned

Select “NO” and then press the [ENTER] button.

DUPLEX

1>2 DUPLEX

1>1 SIMPLEX

2>2 DUPLEX

DUPLEX

BOOK TYPE

TABLET TYPE

Next original?

YES

Summary of Contents for e-studio182







































































































































































































































Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands

Toshiba e-studio182, Operator'S Manual

Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands