Toshiba e-studio182 Operator'S Manual Download Page 128

Page: 128 / 230

5 CHANGING EQUIPMENT’S SETTINGS

126 Walkup Screen Setting

Select the desired walkup screen with

and

buttons, and

then press the [ENTER] button.

Choose one among COPY, FAX or SCAN.

“FAX” is displayed only when the Fax Kit (optional) is installed.

“SCAN” is displayed only when the Scanner Upgrade Kit (optional) is installed.

The walkup screen is set and the screen returns to the menu in step 4.

Press the [USER FUNCTIONS] button or

(copy mode) button.

The screen returns to the “copy mode” main screen.

After the mode has been changed and the time of the automatic function clear has
passed, the setting becomes enabled.

WALKUP SCREEN

1.COPY

2.FAX

3.SCAN

Summary of Contents for e-studio182







































































































































































































































Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands

Toshiba e-studio182, Operator'S Manual

Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands