Toshiba e-studio182 Operator'S Manual Download

Page: 153 / 230

Department Code 151

Select “YES” with

and

buttons, and then press the [ENTER]

button.

Key in the department number you want to clear its counter, and
then press the [ENTER] button.

Keying in the department number of the master code (“01”) will clear all the department
number counter values.

The screen below is displayed for approx. 2 seconds.

Select “COUNT CLEAR” with

and

buttons, and then press

the [ENTER] button.

The screen below is displayed for approx. 2 seconds.

The counter value is now cleared and the screen returns to the one in step 6.

Clear the other counter values as required, following steps 6 and 7.

Press the [USER FUNCTIONS] button or

(copy mode) button.

The screen returns to the “copy mode” main screen.

DEPARTMENT CODE

1.YES

2.NO

DEPARTMENT CODE
ENTER DEPARTMENT NUMBER(1-99):

DEPARTMENT CODE
DEPARTMENT NUMBER:

Already assigned

DEPARTMENT CODE
2.MODIFY
3.RETAIN

4.COUNT CLEAR

DEPARTMENT CODE
DEPARTMENT NUMBER:

Cleared

Summary of Contents for e-studio182







































































































































































































































Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands

Toshiba e-studio182, Operator'S Manual

Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands