Toshiba e-STUDIO 207L Operation Manual Download Page 29

Page: 29 / 172

2.HOW TO MAKE COPIES

Placing Originals 27

2 HOW TO MAKE COPIES



Single feed mode

When the feeding mode is set at “single feed mode”, an original is fed automatically as it is placed on the
RADF (optional). It is useful when you want to copy only 1 original sheet.



P.122 “ADF -> SADF”

If there is another original, insert it in the same way.

After all the originals are pulled in, press [JOB FINISH].

If you want to stop copying, press [JOB CANCEL].

Align the side guides to the original length.

Insert the original with its face up and straight along
the side guides.

The original is automatically pulled in and then the menu of step
3 will be displayed on the touch panel.

Be sure to let go of the original when it starts being pulled.

Summary of Contents for e-STUDIO 207L











































































































































































Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands

Toshiba e-STUDIO 207L, Operation Manual

Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands