Toshiba e-STUDIO 207L Operation Manual Download Page 127

Page: 127 / 172

4.EDITING FUNCTIONS

Outside Erase 125

4 EDITING FUNCTIONS

3) Press [OK].

Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on
it with force.

Breaking the glass could injure you.

Select other copy modes as required, and then press the [START] button on the control
panel.

Place the original on the original glass.



When placing the original, be sure that the Original Cover
(optional) or the RADF (optional) is fully raised. If not, this
function may not properly be able to detect the border
between the original and areas not belonging to it.



Do not directly look at the original glass during copying
since an intense light may leak.

Summary of Contents for e-STUDIO 207L











































































































































































Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands

Toshiba e-STUDIO 207L, Operation Manual

Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands