Toshiba e-STUDIO 207L Operation Manual Download Page 148

Page: 148 / 172

6 TEMPLATES

146 Deleting Groups or Templates

Deleting Groups or Templates

You can delete private groups or templates no longer needed. If a private group is deleted, all the templates in
the private group are also deleted.

The public template group cannot be deleted.



Deleting private groups

In the template menu, select the desired private group.

1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or keying in its group number (3 digits).
3) Press [DELETE].

To switch the menu

Press

or .

Key in the password for the selected group. (If no password is set, go to step 3.)

1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital

keys on the control panel.

2) Press [OK].

Press [DELETE].

The private group is now deleted.

Summary of Contents for e-STUDIO 207L











































































































































































Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands

Toshiba e-STUDIO 207L, Operation Manual

Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands