Toshiba e-STUDIO 207L Operation Manual Download Page 141

Page: 141 / 172

6.TEMPLATES

Registering Templates 139

6 TEMPLATES

1) Press [PASSWORD] and then enter the password (up to 20 characters) with the buttons on the

touch panel or the digital keys on the control panel. The characters keyed in appear as asterisks (*).

2) Press [RETYPE PASSWORD], and then key in the password again.
3) Press [OK].

The symbols below cannot be used in passwords.
' \ % & < > [ ]

When you have entered all the necessary items, press [OK].
The new group is now registered and the menu moves to the one for registering templates.

Press the [FUNCTION CLEAR] button on the control panel.

The menu returns to the BASIC menu.

Summary of Contents for e-STUDIO 207L











































































































































































Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands

Toshiba e-STUDIO 207L, Operation Manual

Search results

Summary of Contents for e-STUDIO 207L

Reviews:

Related manuals for e-STUDIO 207L

Brands by name

Popular brands