manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 67 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 67

3.BASIC COPY MODES

Before Using Copying Functions    65

3 BASIC COPY MODES

Switching to the function setting menu

To change the functions on the current menu, press the corresponding buttons. The desired setting menu will 
then appear.

„

Clearing the set functions

If you want to clear any copy function setting, press [RESET] on the corresponding setting menu.

However, for FULL IMAGE on the EDIT menu, also press the highlighted button to clear the setting.

 

 P.113 “EDITING FUNCTIONS”

Clearing all settings changed

When you press the [FUNCTION CLEAR] button on the control panel, all the function changes will be cleared.
Even if you do not do so, the changes will be cleared if the equipment is left idle for 45 sec. (default setting). 
For how to change this period, refer to the 

MFP Management Guide

.

„

Restrictions on function combinations

Several copy functions can be used together. However some functions may not be used with other ones. For 
details, see the following pages:

 

 P.216 “Copying Function Combination Matrix”

 

 P.218 “Image Adjustment Function Combination Matrix”

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments