manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 133 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 133

4.EDITING FUNCTIONS

Image Editing    131

4 EDITING FUNCTIONS

3

Select [TRIM] or [MASK].

Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on 
it with force.

Breaking the glass could injure you.

4

Place the original on the original glass with its face 
up.

Place it with its bottom toward you. Align its top left corner 
against that of the original glass so that the original will be 
aligned with the original scales.

5

Read the following 4 values to specify the area using 
the left and top scales on the original glass.

X1:

 From the top left to the left edge of the selected area

X2:

 From the top left to the right edge of the selected area

Y1:

 From the top left to the upper edge of the selected area

Y2:

 From the top left to the lower edge of the selected area

Note that the marks of the original scales have a 2 mm (0.08") 
pitch.

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments