manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 31 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 31

1.BEFORE USING EQUIPMENT

Placing Paper    29

1 BEFORE USING EQUIPMENT

‰

Adding paper in the Large Capacity Feeder during copying

When the paper on the left tray of the Large Capacity Feeder has run out during copying, “Paper for left 
drawer can be added.” appears. You can pull out the Large Capacity Feeder and add paper to the left tray 
without stopping copying. This is useful when you wish to make a large amount of copies quickly.

3

Push the drawer of the Large Capacity Feeder straight into this equipment carefully.

When the paper on the right tray has run out, that on the left tray will be automatically shifted to the right 
tray.

Do not slam the drawer shut. Stacked sheets may collapse and they cannot be transported correctly.

Be careful not to let your fingers be caught when pushing the drawer into this equipment. 

This could injure you.

1

Pull out the drawer of the Large Capacity Feeder 
carefully until it comes to a stop.

Only the left tray will come out. 

Do not touch the slide rail (“A” in the figure on the 
right).

This could injure you.

2

Place paper on the left tray.

Place paper aligning to the left-hand side of the tray.

A

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments