manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 30 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 30

1 BEFORE USING EQUIPMENT

28    Placing Paper

y

Paper in the right-hand tray is used first. When it runs out, paper in the left-hand tray will be 
moved automatically to the right-hand tray and fed.

y

A maximum of 2360 sheets (64 g/m

2

) (17 lb. Bond) can be placed in the 2 trays. However the 

stack height of the paper must not exceed the line indicated inside the side guides.

 

 P.11 “Acceptable copy paper”

y

The copy side may be noted on its wrapping paper.

y

Be careful not to cut your fingers when fanning the paper.

y

When placing paper, be sure that the center lever is not open. (See the label attached in the 
drawer of the Large Capacity Feeder.)

3

Push the drawer of the Large Capacity Feeder straight into this equipment carefully.

When the drawer is completely inserted, the right-hand tray will move up to the paper feeding position.

Be careful not to let your fingers be caught when pushing the drawer into this equipment. 

This could injure you.

4

Change the paper type as required.

 

 P.23 “Setting paper type”

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments