manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 51 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 51

2.HOW TO MAKE COPIES

Bypass Copying    49

2 HOW TO MAKE COPIES

y

The height of the paper must not exceed the indicator on the side guides.

y

When you use more than one sheet of paper, fan the sheets well before placing them on the 
bypass tray. Be careful not to cut your fingers when fanning.

y

Do not push paper into the entrance of the bypass feeder. This could cause a paper misfeed.

4

Select the same size button under “COPY” as that of the paper you placed on the 
bypass tray.

The paper size is now set.

If the paper size is not selected in this step, copying may be slowed down.

5

Press [PAPER TYPE] on the touch panel if the paper type of the paper you placed on 
the bypass tray is other than plain paper.

3

Align the side guides to the paper length. Move the 
paper holding lever toward the equipment.

When paper is placed, the menu for bypass copying appears.

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments