manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 21 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 21

1.BEFORE USING EQUIPMENT

Placing Paper    19

1 BEFORE USING EQUIPMENT

e-STUDIO5055C Series, Paper Feed Unit, Paper Feed Pedestal, or Additional Drawer Module

1

Turn the power of this equipment ON.

2

Pull out a drawer carefully until it comes to a stop.

3

While holding the green lever of the side guide in the 
direction of the arrow, set the side guide to the paper 
size (E.g. A4-R).

Adjust the side guides with both hands.

4

Place paper in the drawer.

y

One drawer can hold up to 600 sheets (64 g/m2) (17 lb. 
Bond).
Be sure that the height of the stacked paper does not 
exceed the line indicated inside of the side guides.

 

 P.11 “Acceptable copy paper”

y

Fan and jog the stack of paper well before you place it in 
a drawer, or the sheets may not be separated before 
being fed. Be careful not to cut your fingers when 
fanning.

y

Place paper with its copy side up. The copy side may be 
noted on its wrapping paper.

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments