manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 112 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 112

3 BASIC COPY MODES

110    Performing Copy & File

7

When all have been scanned, press [JOB FINISH] on the touch panel.

Copying and storing start.

„

Setting share folder

When a user who has the privilege of setting a share folder has pressed [REMOTE 1] or [REMOTE 2], the 
menu for specifying a directory appears.

The setting items differ depending on the file transfer protocol to be used. FTP, SMB, NetWare IPX/SPX, 
NetWare TCP/IP and FTPS are selectable for a file transfer protocol.

FTP / FTPS

When you press any of the buttons below, the on-screen keyboard appears. Enter with the buttons on the 
touch panel or the digital keys on the control panel. When you finish the entry, press [OK].

SERVER NAME:

 Press this to enter the IP address of FTP server. For example, if the data should be 

transferred to an FTP folder ftp://10.10.70.101/user01/scan/, key in “10.10.70.101”.

NETWORK PATH:

 Press this to enter a network path to an FTP folder where the data are to be stored. For 

example, if the data should be transferred to an FTP folder ftp://10.10.70.101/user01/scan/, enter 
“user01\scan”.

LOGIN USER NAME:

 Press this to enter a user name to login to the FTP server. Enter this as required.

PASSWORD:

 Press this to enter a password to login to the FTP server. Enter this as required.

COMMAND PORT:

 Press this to key in a command port number for executing commands. Normally “-” is 

entered in this field, which means that a port number set by the administrator will be used. Change this 
only when you want to use any other port number.

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments