manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 77 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 77

3.BASIC COPY MODES

Enlargement and Reduction Copying    75

3 BASIC COPY MODES

2

Press [ZOOM] on the touch panel.

3

Select the desired paper size, press [AMS] and then [OK].

y

If you want to select a paper size other than the following, you need to register the size as 
“OTHER”. Once you register this size, it will be specified every time you press [OTHER] on the 
touch panel. 
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5 
For how to register, see the following page:

 

 P.77 “Registering paper sizes to “OTHER” size”

y

Paper sizes can also be registered by pressing the desired drawer button of the equipment 
status indication area on the BASIC menu.

4

Place the original(s).

If the original is placed on the original glass, the reproduction ratio is set when the original is placed. If 
the original is placed on the RADF, the reproduction ratio is set when the original is scanned. 

If “Change direction of original” appears, change it accordingly.

5

Select other copy modes as required, and then press the [START] button on the control 
panel.

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments