Toshiba E-studio 2050c Copying Manual Download Page 149

Page: 149 / 228

4.EDITING FUNCTIONS

Job Build 147

4 EDITING FUNCTIONS

Place the first stack of originals, and then select settings.

When placing the original on the original glass, remember that 1 page is equal to 1 job.

When placing mixed-size originals on the RADF, see the following page:

P.68 “Copying mixed-size originals in one operation”

If you want to use a particular drawer, select it.

Press [SETTINGS] on the touch panel to confirm the current settings.

If you want to change the settings, press the [FUNCTION CLEAR] button on the control panel,
and then restart the procedure from step 1.

Press the [START] button on the control panel.

Scanning starts. When the scanning of all the originals is finished, the message below appears.

Place the next stack of originals, and then select the settings.

Repeat steps 4 and 5 until all the desired pages have been scanned.

If you do not change any settings, those for the last job will be applied.

When the scanning of all the originals is finished, change the number of copy sets as
required. Then press [JOB FINISH] on the touch panel.

Copying starts. If any storing function is set, that will also start.

Summary of Contents for E-studio 2050c




































































































































































































































Search results

Summary of Contents for E-studio 2050c

Reviews:

Toshiba E-studio 2050c, Copying Manual, Page: 149 / 228

Search results

Summary of Contents for E-studio 2050c

Reviews: