Home
/
Toshiba
/
E-studio 2050c
/
Copying Manual

Toshiba E-studio 2050c, Copying Manual, Page: 118 / 228

Share

Page: 118 / 228

Toshiba E-studio 2050c Copying Manual Download Page 118

4 EDITING FUNCTIONS

116 Image Shift

5

Adjust the width of the binding margin.

1) Press [FRONT MARGIN] and adjust the binding margin width on the front side using [

0 mm] (0")

and [

100 mm] (3.94"). (The width on the back side will be also adjusted in the same way.)

2) Press [BACK MARGIN] and adjust the binding margin width on the back side using [

0 mm] (0")

and [

100 mm] (3.94"). (Only the width on the back side will be adjusted.)

3) Press [OK].

Note that a left/right binding margin will be created on the opposite side on the back side of paper in
duplex copying. (For example, when a binding margin is created on the right of the front side of the
paper, it will be created on the left of the back side.)

6

Press [OK].

7

Select other copy modes as required, and then press the [START] button on the control
panel.

«
...
116
117
118
119
120
...
»

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments