manualshive.com logo in svg

Toshiba E-studio 2050c, Copying Manual, Page: 165 / 228

Share
Download
Toshiba E-studio 2050c Copying Manual Download Page 165

5 IMAGE ADJUSTMENT

 Using Image Adjustment Functions    163

Using Image Adjustment Functions

„

Color balance (YMCK adjustment)

This function allows you to adjust the overall color balance of the copied image by changing the strength of 
YELLOW (Y), MAGENTA (M), CYAN (C) and BLACK (K). This function is available in the full color mode or 
the auto color mode.

1

Press [COLOR BALANCE] in the IMAGE menu.

2

Press 

 or 

 of each color to obtain the desired color balance.

After completing the color balance adjustment, press [OK]. This is the end of the setting.
If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step.

3

Press 

 or 

 of the color on each density area to obtain the desired color balance.

For example, when you adjust the high density area of magenta (M) to the 

 side, the magenta in its 

high density area becomes darker.

After completing the adjustment, press [OK].

Canceling color balance adjustment

y

Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].

y

If you want to cancel the adjustment of all colors, press [RESET], and then [OK].

YELLOW (Y)

MAGENTA (M)

CYAN (C)

BLACK (K)

Summary of Contents for E-studio 2050c





































































































































































































































Reviews:

No comments