18 -
English
C
onnections
Connecting DVD
Recorder & VCR to the
TV using the RF Cable
1
Remove the aerial or network input cable from
the television.
2
Connect this cable to the 75Ω aerial jack
marked
on the rear of your DVD Recorder &
VCR.
3
Plug the RF Cable supplied into the
jack on
your DVD Recorder & VCR.
4
Plug the other end of the RF Cable into the
connector previously used for the aerial on the
television.
TV
Make sure that both the television and the
DVD Recorder & VCR are switched off
before connecting the cables.
Note
Connecting the SCART
Cable
❚
Case 1 : Connecting DVD Recorder & VCR
to the TV using the SCART Cable
You can connect your DVD Recorder & VCR to the
television using the SCART cable if the appropriate
input is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD
Recorder & VCR
1
Connect the Aerial Cable.
2
Connect one end of the SCART cable to the AV1
(TV) jack on the rear of the DVD Recorder &
VCR.
3
Plug the other end into the appropriate connector
on the television.
Regardless of the type of connection chosen,
you must always connect the RF Cable.
Otherwise, no picture will be visible on the
screen when the DVD Recorder & VCR is
switched off.
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
Note
To obtain better quality pictures and sound
on your television, you can also connect your
DVD Recorder & VCR to the television via
the SCART cable if your television equipped
with a scart type of connection.
Note
VR30SG-eng-1 6/10/05 4:05 PM Page 18
