74
Deutsch
English
5.5 Ideal insertion depth
The insertion depth of the propeller in the water affects the efficiency of your drive. You
can optimize the propeller’s insertion depth with the aid of the information on speed and
consumption shown on the display.
5.6 Unusual functions/emergency situations
You can stop your motor in 3 different ways:
1. Move remote throttle to stop position
2. Pull magnetic key
3. Remove motor cable from the battery (main switch)
In the unlikely event that your lithium battery catches fire try to
position it such that it causes the least possible damage. Water cannot
extinguish a lithium fire - if possible extinguish the fire with sand.
5.7 Error messages/trouble shooting
Display
Cause
What to do
E02
Motor overheated
Motor can be used again after a short wait (about 10 minutes).
Contact Torqeedo Service.
E03
Motor tipped during
operation
Motor can be used again after tipping it down and pressing on/
off.
E04
Move command with
tipped motor
The engine can be driven again after tilting from the stop posi-
tion
E05
Motor/propeller blocked
Separate motor cable from battery. Loosen blockage and turn
propeller one revolution by hand. Insert motor cable again.
E06
Voltage in the motor too
low
Low battery charging status. Motor can be used again slowly
from the stop position.
E07
Motor overcurrent
Continue at low output. Contact Torqeedo Service.
E08
Circuit board overheating
Motor can be used again after a short wait about 10 minutes).
Contact Torqeedo Service.
