63
DE
EN
6.4 Mounting the motor to the boat
6.4.1 Mounting the motor with transom clamp bolts
1
1.
Position the motor on the transom of the boat.
2.
Tighten the transom clamp bolts (1) ensuring the motor can still be moved.
3.
Align the motor with the centre line of the boat.
4.
Tighten the transom clamp bolts firmly.
6.4.2 Mounting the motor permanently
Prepare the motor for installation
TIP!
First mount all components of the Torqeedo system in the boat and only
then carry out the wiring.
CAUTION
Danger of crushing due to uncontrolled tilting of the transom bracket. This
can result in minor or moderate bodily injuries.
•
Set the tilt lock lever to the "Lock" position to lock the transom bracket.
1.
Open the transom clamp bolts of the transom bracket.
Align the motor and prepare the transom
CAUTION
Danger of injury due to boat tipping. This can result in minor or moderate
bodily injuries.
•
Make sure that the boat is positioned safely and stably.
2
1
2
1.
Position the motor on the transom of the boat.
2.
Tighten the transom clamp bolts (3) ensuring the motor can still be moved.
3.
Align the motor with the centre line of the boat.
4.
Tighten the transom clamp bolts hand-tight.
5.
Mark the attachment lugs (2).
6.
Open the transom clamp bolts and mount the motor.
TIP!
Do not drill the holes for the fastening through the transom bracket as this
will damage the lacquer coating and cause corrosion.
7.
Drill the holes for the transom bracket according to the markings, use a drill
