Toro TimeCutter HD MyRide 60in, Operator'S Manual

Page: 31 / 32

1. Remove the locknut, bolt, spring, and
spacer that secure the grass deflector to
the pivot brackets on the deck (
Figure 42 ).
Remove the damaged or worn grass deflector.
g015594
1
6 2 4
7
3
5
Figure 42
1. Bolt 5. Spring installed
2. Spacer 6. Grass Deflector
3. Locknut 7. J - hook end of the spring
4. Spring
2. Place the spacer and spring onto the grass deflector.
Place 1
J -hook end of the spring behind the deck edge.
Note:
Ensure that 1 J -hook end of the spring is
installed behind the deck edge before installing the bolt
shown in
Figure 42 .
3. Install the bolt and nut. Place 1 J -hook end of the
spring around the grass deflector ( Figure 42 ).
Important:
The grass deflector must be able
to rotate. Lift the deflector up to the full open
position and ensure that it rotates to the full down
position.
Storage
1. Clean the bagger attachment; refer to Cleaning the
Bagger and Bags (page 29) .
2. Inspect the bagger attachment for damage; refer to
Inspecting the Bagger (page 30) .
3. Ensure that the bags are empty and thoroughly dry.
4. Check the belt for wear or cracks.
5. Store the machine in a clean, dry place, out of direct
sunlight. If you must store the machine outside, cover
it with a weatherproof cover. This protects the plastic
parts and extends the life of the machine.
31