Toro TimeCutter HD MyRide 60in, Operator'S Manual

Page: 16 / 32

G018362
1
2
3
5
4
Figure 18
Bag Installation
1. Hood 4. Mount tab
2. Notched-bag bracket 5. Bag
3. Hopper-support frame
2. Align the mount tab of the bag assembly with the
notched-bag bracket (
Figure 18 ).
3. Lower the bag assembly until the bag tab is fully seated
in to the notched bracket (
Figure 18 ).
4. Repeat steps 1 and 2 for the other bag ( Figure 18 ).
5. Lower the bagger hood over the bags ( Figure 18 ).
6. Align the hole in the hood latch with the hood
hold-down rod. (
Figure 19 ).
7. Push the hood latch forward until the end of the hood
rod has passed through latch as shown in
Figure 19 .
g018363
1
2
3
Figure 19
9
Routing the Blower Belt into
the Blower Assembly
Parts needed for this procedure:
1 Blower (from the blower and drive kit)
1 Blower belt (from the blower and drive kit)
Procedure
1. Install the belt around the blower pulley ( Figure 20 and
Figure 21 ).
G018368
1
2
3
4
Figure 20
Blower Belt Routing
1. Drive pulley 3. Blower pulley
2. Blower belt 4. Idler/tension pulley
16