Important:
Ensure that the drill bit does
not contact the muffler when drilling the
heat-shield-mounting hole in the lower-left engine
guard.
5
Installing the Exhaust Shield
Parts needed for this procedure:
1
Exhaust shield
3
Flange-hex-head bolt (3/8 x 1 inch)
3
Nut (3/8 inch)
Procedure
Install the exhaust guard on the lower-left bumper as follows:
1.
Align the hole of the exhaust-guard left flange to the
hole in the small, angular area of the engine guard as
illustrated in
for
Domestic (US) mowers
or
in
for
International (TE) mowers.
G018364
6
2
1
1
2
3
4
4
5
Figure 9
Heat-Shield Installation on US Domestic Mower
1.
Lower-left engine guard
4.
Nut (3/8 inch)
2.
Exhaust shield
5.
Flange nut (lower-left
engine guard,
back-mounting point)
3.
Flange-hex-head bolt (3/8
x 1 inch)
6.
Tailpipe extension
11
