Figure 6
1.
Heat shield
2.
Heat shield 2 x 10 inch
piece
9. Insert the seat wire harness through the slit in the
heat shield.
10. Remove the backing and affix the 2 x 10 inch piece
of self-adhesive heat shield between the seat latches
on the bottom of the seat mount plate (Figure 6).
11. Plug the seat switch wire harness back into the seat
connector.
12. Remove the 3 front cover mounting screws and
remove the cover (Figure 7).
Figure 7
1.
Front cover
2.
Mounting bolts
13. Clean the engine side of the front cover and install
the self-adhesive heat shield material (Figure 8). The
heat shield must be positioned so that the cover
can be reinstalled without clamping the heat shield
material between the access cover and the frame. Do
not install the panel at this time.
Figure 8
1.
Front cover
2.
Heat shield
14. Install rubber grommets into the 3 holes in the rear
frame mount as shown in (Figure 9).
Figure 9
1.
Rubber grommets
9
