Toro 23825, Operator'S Manual

Page: 25 / 128

Figure 11
1. Front platform latch
Monitor
Start-up Screen
When you power up the machine, this is the first screen that
appears (
Figure 12 ).
The start-up screen appears whenever you press the ESC
button (found in the bottom-left corner of the screen) from
the first 3 pages of the display.
Note:
No keys are active from this screen.
1
2
3
4
5
6
7
8
OK
ESC
DD4045
g025077
Figure 12
Start-up Screen
Control-select Screen
When you power up the machine, this is the screen that
appears after the start-up screen.
The 2 control layouts that the operator can choose from
consist of the following:
•
Mode I—This function places the drilling functions on
the right joystick, while the left joystick operates the pipe
loader and the wrench functions (
Figure 13 ).
Press button number 4 to select this function ( Figure 13 ).
•
Mode II—This function splits the drilling, wrench, and
pipe loading between the left and right joysticks (
Figure
13 )
Press button number 8 to select this function ( Figure 13 ).
1
2
3
4
5
6
7
8
OK
ESC
1
2
g025078
Figure 13
Control-select Screen
1. Mode I 2. Mode II
Note:
If a selection is not made within 5 seconds, the
screen will default to the previous setting and will go to the
Machine-information Screen (page 26) .
25